Sewing a curtain
A tie-up curtain is a simple way to dress up a window to create a look that is between the formality of a Roman shade and the casual look of a cafe valance. To create this look is surprisingly easy and inexpensive with simple sewing techniques. This window treatment looks best with a fixed type of decorative rod that is chunky and can handle simple finials like ball shapes. Does this Spark an idea?
Instructions
1. Measure the width of your window, and add 2 inches. Measure the height of your window, and add 3 inches. Preshrink your fabric, and iron it flat.
2. Cut your fabric to your measurements. Double-hem your fabric on all four sides by tucking your fabric under 3/8 inch and then 1/2 inch and sew in place. Iron the hems.
3. Cut two pieces of grosgrain ribbon twice the length of the window height. Keep in mind that the curtain will tie up within the window height. Fold each ribbon in half to find the center, and mark with a pin.
4. Place your curtain face up on your work table. Measure the width of your curtain, and divide by 4. Pin the center of one ribbon one-fourth the distance from the side of the curtain at the top hem. Half the ribbon should be above the top hem of the curtain. Pin the second ribbon one-fourth the distance from the other side of the curtain at the top hem.
5. Measure 4 inches down from the top hem, and pin the ribbons again, making sure the ribbon is parallel with the side of the curtain. Turn your curtain over so that it is face down.
6. Check that half of each ribbon is out of the way of sewing (on the fabric face side) and that the remaining ribbon is above your top hem. Fold your top hem 2 and 1/2-inches from the top to make a rod pocket. Bring your ribbon tails with you. Sew your curtain rod pocket at 2 1/2 inches crossing over the ribbon on both sides of the curtain. This is how you attach the ribbon to the curtain. Remove the pins.
Tags: your curtain, your fabric, side curtain, distance from, each ribbon