Install Shower Curtain Rods

Install Shower Curtain Rods

Installing a shower curtain rod is easy and should only take a few minutes. Some shower curtain rods are made to simply wedge in between the two walls of the shower, and require no tools or permanent installation. This article will focus on quick, easy installation for permanent shower curtain rods. Does this Spark an idea?

Instructions

1. Determine the length of your shower curtain from the package. Measure that length from 5 to 7 inches off the floor of the tub and mark the height on the wall. Repeat the measurement and mark the opposite side of the shower wall.

2. Secure mounting bracket to each shower wall by drilling at the two marks you made. Make sure that the open bracket is facing up.

3. Once the brackets are in place, install the rod into the brackets. Place the rod in the closed bracket first, then slid it into the open bracket.

4. Slide the shower curtain rings on the rod and then hang the curtain. Snap the rings shut.

Tags: Curtain Rods, Install Shower, Install Shower Curtain, open bracket, shower curtain, shower curtain, shower wall