Making camper slip covers is a breeze for even beginning sewers. They are easy to slide on and off the cushions, and by choosing the correct fabric, they'll be machine washable and dryer safe. The inside of your camper will always look fresh and clean, and your friends will be begging you to teach them sew camper cushions. Does this Spark an idea?
Instructions
1. First measure cushions by length, width, and height.
Add 3/4" all around for seam allowance. Roughly sketch a picture of each cushion on a piece of computer paper. Take this to the fabric store with you.
2. Choose your fabric. You probably don't want to be taking these to the cleaners so pick out a machine washable, dryer safe fabric. Pay attention to potential shrinkage. If you decide on 100% cotton, buy a little extra fabric to allow for shrinkage and be sure to pre shrink before cutting the fabric.
3. Take your fabric to the cutting table and ask the clerk to help you estimate the yardage. You may be capable of doing this yourself, but it's always good to get a second opinion. Get an opinion on the best type of zipper. This will depend on your fabric and/or how long a zipper you need. Make sure you purchase all your notions.
4. * At home, lay out the fabric and measure using a yardstick if needed. Mark your cutout lines on wrong side of fabric using tailors chalk. You're probably going to mainly be sewing squares and rectangles. Before you begin sewing, take a look at the construction of the cushions for which you are making these slip covers. These will be a very helpful guideline.
5. To construct the zipper panel, cut the fabric in half. See illustration.
Tags: your fabric, dryer safe, machine washable, machine washable dryer, slip covers, washable dryer, washable dryer safe