Oak is a hard, sturdy wood harvested from any of the trees in the oak family. If you want to make long-lasting furniture or flooring, oak is ideally suited for these purposes. Much like other woods used in construction, you can ensure the integrity of your oak by taking some precautionary steps to avoid cracking. Such damage is a result of too much moisture, not enough moisture in the wood or an uneven base surface. Depending on the cause and how the oak is used, there are ways to stop the damage.
Instructions
1. Soak both sides of the oak with linseed oil to provide extra moisture and allow even drying.
2. Put a dehumidifier in the room where the oak is located to eliminate excess moisture. This method is especially useful for installed wood floors.
3. Cut the oak into smaller pieces when setting them to dry to allow for even evaporation of moisture. If moisture is more concentrated in one area than another, the disparity can result in cracking.
4. Check the moisture level of the foundation ground where the wood will be installed. Excess moisture below wood flooring induces cracking over time.
5. Direct heating ducts and vents away from the floor or furniture. Excess heat exposure will extract the needed moisture remaining in the wood.
6. Remove any remain spongy core, or pith, from drying oak logs using a power drill. Moving the pith out of the way allows for even drying.
Tags: allow even, even drying